The Tape Depot

KAPTON POLYIMIDE ELECTRICAL GRADE TAPE - 1 and 2 MILS
:

:

:
Amber

:
 
Polyimide Electrical Grade/Printed Circuit Tapes

 

PRODUCT NUMBER/SPECIFICATIONS
Wave Solder/Hot Air Leveling Tape


1 mil Electrical POLYIMIDE film coated with a high performance sillicone adhesive. Total thicknees: 2.6 mil (0.065mm).Thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive wll thermoset to increaseadhesion values. Leaves minimal residue when removedafter manufacturing process; redues clean-up time and minimizes rejects. Permits observation of boardduring processing. Excellent resistance to acids, oils, solvents, aging, staining, water immersion. Protects goldcontacts from molten solder during hot air wave solder leaving process. Adhesion: 24oz/in. Tensile: 38lbs/in. Elongation: 90%. Temp. resistance: -100ºF to 500ºF (-73ºC to 260ºC). Dielectric Strength: 6500V. Color: Ambre (Transparent). UL510 approved for flame retardance. Formulated to meet Mil spec: MIL-P-46112B. 3" plastic core.


Mill:

  • A "mil" is a unit of thickness equal to one thousandth of an inch. 
  • To convert mil to inches take mil & divide by 1000. 
  • Thus, a 2 mil bag would be .002 inches thick.
  • Example: Ex: 2 mil/1000 =.002 inches
Polyimide Electrical Grade/Printed Circuit Tapes

 

PRODUCT NUMBER/SPECIFICATIONS
Wave Solder/Hot Air Leveling Tape


1 mil Electrical POLYIMIDE film coated with a high performance sillicone adhesive. Total thicknees: 2.6 mil (0.065mm).Thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive wll thermoset to increaseadhesion values. Leaves minimal residue when removedafter manufacturing process; redues clean-up time and minimizes rejects. Permits observation of boardduring processing. Excellent resistance to acids, oils, solvents, aging, staining, water immersion. Protects goldcontacts from molten solder during hot air wave solder leaving process. Adhesion: 24oz/in. Tensile: 38lbs/in. Elongation: 90%. Temp. resistance: -100ºF to 500ºF (-73ºC to 260ºC). Dielectric Strength: 6500V. Color: Ambre (Transparent). UL510 approved for flame retardance. Formulated to meet Mil spec: MIL-P-46112B. 3" plastic core.


Mill:

  • A "mil" is a unit of thickness equal to one thousandth of an inch. 
  • To convert mil to inches take mil & divide by 1000. 
  • Thus, a 2 mil bag would be .002 inches thick.
  • Example: Ex: 2 mil/1000 =.002 inches

 

 

 

 

 

 

 

 

 




Home | About | Top Sellers | Shipping | Contact | Our Tapes

Web Design & Development by Gianfranco.us