TFES - (-2HD, -5, or -10)... Self-WoundWithout liner.

---

Pure skived Teflon™ (PTFE) with a high temp. silicone adhesive. Used in electrical applications such as harness/coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release ¬ guide rails where high temperature, maximu, slip and lubricity are required. TFES-2D is a high density, TENSILIZED skived PTFE film which provides higher tensile strength, lower elongation and higher dielectric strength than regular skived film (primarily used for electrical applications listed above & for roll protection in flat die extrusion.) High elongation of TFES-5 permits tight wrapping; conforms to sharp bends/irregular surfaces. Meets MIL-I-23594C, type 1, Revised Spec. AA 59474. 3" plastic core.

---

PHYSICAL PROPERTIES:
Operating temperature range: -100ºF to +500ºF (-73ºC to 260ºC)

Alternative to: 3M #5480; Permacel #P422; DeWal #204-2HD; St. Gobain #2255-2; Taconic #6445-02; Chemfab #380-02; Lanmar #585-2; Bondtec #932F.

Backing	2 MIL/0.0002"
Total thickness	0.004"
Break strength (lb/in)	30
Adhesion (oz/in)	25
Elongation	100
Temperature rating (ºF cont. use)	-100 to +500
Dielectric sterngth (total volts)	8,200
Shel Life>6/<12 months

---

Mill:

• A "mil" is a unit of thickness equal to one thousandth of an inch. 
• To convert mil to inches take mil & divide by 1000. 
• Thus, a 2 mil bag would be .002 inches thick.
• Example: Ex: 2 mil/1000 =.002 inches