Reflexite Conspicuity 5 & 10 Year Pattern

PRODUCT NUMBER/SPECIFICATIONS
DOT/DOT-C2

---

Reflexite® Conspicuity materials is composed of cube coner (microprism) retroreflective elements integrally bonded to a flexible, smooyh-surfaced, tough and weater-resistant UV-stabilized polymetric film. The prism surfaces are coated with a vacuum deposition of aluminum to provide a mirror surface to the prism facets. The resulting tape high-tack pressure-sensitive adhesive.

Application...
Reflexite® Visibly Better ™ Retroflective Conspicuity materials is a tough weather and solvent resistant product designed for rugged outoor use on the sides and rear of trucks, trailers, automobiles, and emergency vehicles to enchance safety on the roadway by improving their visibility. NOTE: NHTSA conspicuity regulations (effective 12/1/93) mandate that all new trailers - 10,000 lbs GVW and 80º wide or larger, must be reflectorized with alternating red & white retroflective sheeting on the sides, bottom of rear door, and ICC bar; and two pieces of white sheeting on the upper corners of the rear. Applications temperature: minimum 50ºF

---

Features/benefits...

• Durability >>> 3-year or 7-year warranty <<< Whitstands brushing off of dirt and grime, and high pressure washing. Polyester based film resists cracking & lifting. Will retain reflectivity even after impact against loading dock or abrasion by chains.
• Unique, single-ply construction ensures impact & abrasion resistance and easy applicattion.
• 0.008" thickness resists dirt accumulation typical of competitor's thicker (0.025"), open-cell construction. Materials is extremely thin so there are no raised edges that can catch and tear.
• Unlike competing conspicuity materials, Reflexite® conspicuity materials features 100% adhesion, with no grid lines that can fill with water and cause premature adhesive failure.
• Super-highbrigthness & wide angularity: Typically 1000 candle-power with tremendous long sight distance performance; reflects at all applicable angles on the radway.
  

Specifications compilance...
ASTM D4956
LS300C           NHTSA 49 CFR, Part 571
FP92                DOT-C2
ASTM D523    FMVSS 108
ASTM E810

---

Mill:

• A "mil" is a unit of thickness equal to one thousandth of an inch. 
• To convert mil to inches take mil & divide by 1000. 
• Thus, a 2 mil bag would be .002 inches thick.
• Example: Ex: 2 mil/1000 =.002 inches